- Input voltage12v
- Light source24 pcs SMD 3020
- Lumen output70-76lm
- Color temperature2700k-6500k
- 1 light with1.8m lead and end with a mini connector and mounting accessories
- Packagewhite box or custom
- CertificationCE, ETL, UL, GS, REACH, RoHS, SAA, VDE
- Driving/Power supply optionalHJ-BYQ-641(12V-12W)
Fixed down lights are a decorative downlighter that has a fixed centre. The lamp is usually fixed within the holder either by using a spring clip or by a twist lock mechanism. The spring clip is compressed a little and placed over the front of the lamp where it then expands and sits within a groove holding the lamp in position. The twist lock is normally used in higher quality cast aluminium fittings where the front of the fitting has a removable section that twists and locks into place holding the lamp in position.
A gimbal downlight is constructed in the same way as other down lights. It is secured in the ceiling the same and will normally have the same type of lamp retainer. The main difference is that the centre of the fitting can be tilted allowing adjustment of the spotlight beam. These can be an advantage if you want to direct the light slightly towards a breakfast bar, kitchen worktop or something similar.
An eyeball down light is similar to a gimbal but can be adjusted through a greater range. It has a protruding eyeball containing the lamp. This eyeball can be adjusted as desired.
These are mounted in the ceiling but they are very different in their application. Wall washer down lights have the lamp contained within a hinged housing that can rotate to 90 deg. These are used to shine light onto the walls as opposed to straight down.
wholesale wardrobe light supplier&manufacturer,china oem wardrobe light factory
Whether for boys or girls, a large wardrobe is an essential storage tool for all trendy girls and boys pursuing classic and fashionable clothing. Therefore, if you want to find your best accessories and clothing in it, the wardrobe light is indispensable.
Use LED lights as your wardrobe lights
LED light, low heat, energy saving, low voltage, safe, as a wardrobe cabinet lighting and home beautification is a very good choice.
LED light source for wardrobe cabinets, it is better to use low-voltage soft light strip or low-voltage hard light strip. Especially the flexible light belt is easy to install, can be cut on site according to actual needs, and it is easy to transport.
The LED power supply is recommended to be an isolated power supply with a constant voltage and current of 12V30W, which is safe and low in heat. The key is to make the light source stable and durable.
It is not recommended to use mechanical touch control, it is not durable. Now the magnetic control switch and the human body infrared sensor switch are easy to use compared to the price, which are easy to use and install, and there are few failures.
The installation method, measure the size of the light source, and choose a relatively hidden place to install the power supply. When installing the magnetron control device, you must match the position before fixing it. Generally, it is fixed above the door. The human body infrared sensor switch prevents the direct light source from affecting the control sensitivity. General professional manufacturers have terminal heads for direct connection. If you want to connect your own wiring, you must pay attention to safety. If you disconnect the wiring, you must do an insulation wrap to ensure safety. Power on trial after all installations are complete.
Types of wardrobe lights
Magnetic induction night light
Advantages: compact and convenient, does not occupy closet space. And most of them are in USB charging or battery mode, which saves the troublesome steps of installing the lamp, tear off the 3M glue and stick it, and then attach it to put it into use.
Disadvantages: The battery capacity is relatively small and has to be charged every time. In the case of poor battery quality, it is easy to charge frequently. Moreover, point light sources will cause uneven light coverage.
Linear induction wardrobe light
Most of the types of LED light bars are wiring types, and a small number of them also have charging models.
Advantages: The light is more adequate, more uniform, and most importantly, it looks better.
Disadvantages: The wiring installation is more complicated, but it is not difficult. First find the correct position-drive in the screw-buckle (adsorption, paste, hanging board form)-connect the power supply to complete the installation.
Pay special attention to the installation. If the wardrobe lamp has a sensing function, the sensing probe should be facing the wardrobe door, and the position of the lamp should not be too close to the inside, which may cause errors in sensing. The LED light bar pursues color, style, and material to match the cabinet. The size of the main accessories should not exceed the specifications of the cabinet to create a more unified feeling. You can also directly request the manufacturer to reserve embedded wardrobe lights when customizing the wardrobe. The location is more beautiful.
Induction hanger light
The hanger lamp replaces the hanger, which can not only play the role of lighting, but also does not affect the wardrobe space. The installation is also relatively simple, the two ends are installed with fixed accessories, and it can be completed by putting it up.
Disadvantages: Because it is a hanger instead of a hanger, if you happen to encounter a hanger lamp of poor quality and poor hardness, it may cause bending, so be careful when purchasing.
1.May I have a sample order ?
Yes, sample order is available.
2. What about the lead time?
The lead time of sample is 5-7 days, the delivery time of order is 7-45 days.
3. Do you have any MOQ limit for order?
Yes, the MOQ limit is according to different product.
4. How do you ship the goods and how long does it take to arrive?
We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is optional.
5. How to proceed an order?
Firstly let us know your requirements or application.